Description
4/1/21- Our experience with king lead times – They seem to be under estimating them, we are seeing 6-8 MONTH lead times, after initial lead times were not met. – Shocks are built to order.
The 2.5″ King OEM Performance coilovers for the 2010-2014 Toyota FJ Cruiser are direct bolt-on replacement shocks intended for maximum performance. These coilovers are specifically designed to optimize off-road performance without compromising on-road handling. The shocks are adjustable for up to 2.5″ of lift and include all necessary hardware needed for installation.
- Cadmium plated chromoly bodies
- 7/8″ hard chromed, heat treated, micro polished shaft
- Aircraft quality billet aluminum components
- Heat treated 6061 aluminum alloy piston
- Heat treated stainless alloy valve shims
- Teflon bronze composite wear band
- Long lasting urethane seals
- Hard anodized aluminum reservoirs
- Replaceable Teflon lined spherical bearings
- Fully rebuildable and serviceable
- Made in the USA
Specs:
For best performance the coilovers should be set at mid-shaft or about 2″ over stock height.
- Allows up to 2.5″ of Lift
- Up to 25% increased wheel travel over stock
- Extra ¾” of down travel – Must be used with aftermarket upper control arms
- We do not recommend setting the pre-load on the shock for more than 2.5″ of lift. Excessive preload over articulates the stock components, reducing ride quality significantly and causing premature wear on the components.
What’s Included:
For best performance the coilovers should be set at mid-shaft or about 2″ over stock height.
- Allows up to 2.5″ of Lift
- Up to 25% increased wheel travel over stock
- Extra ¾” of down travel – Must be used with aftermarket upper control arms
- We do not recommend setting the pre-load on the shock for more than 2.5″ of lift. Excessive preload over articulates the stock components, reducing ride quality significantly and causing premature wear on the components.
Fitment:
2010-2014 Toyota FJ Cruiser 2WD / 4WD