Description

30-60 Day eta

FJ Cruiser Fender Flaps
Front mud flap modification kit that can increase up to 2″ of additional tire clearance and help reduce/eliminate common tire scrape/rub from new tires. Will solve scrape/rub without BMC provided scrape/rub is minor usually driver’s side while making hard left turn. If scrape/rub is more significant and hits body mount, then BMC is normally required and the FLAPS then provide a great cover up for the plastic area of the mud flap that must be cut away. The FLAPS are intended for those who wish to use their factory flares and mud flaps. Everything needed is included in the kit and the modification can be done in less than an hour with basic tools.

MADE IN U.S.A
EASY INSTALLATION
CLEAN FACTORY-LIKE APPEARANCE
DESIGNED SPECIFICALLY FOR FJ CRUISER/ ALL YEARS
EFFECTIVE COVER-UP IF YOU HAVE A BMC
NITRILE RUBBER RESISTANT TO OILS AND CHEMICALS
ADDS 2″ OF TIRE CLEARANCE
ELIMINATES OVER-SIZED FRONT TIRE SCRAPE
PATENT PENDING

FJ Fender Flaps – Parts Included:
(2) FJ FENDER FLAPS
(1) Paper cut-out template
(2) Large paper clips
(6) Black retaining pins
(2) Pieces 3/4″ x 3″ foam tape
Installation Instructions
Tools Needed
Sharp scissors or razor knife
3/16 punch or awl
Sharpie (red fine point)
10mm socket wrench
Body panel removal tool