Description
We have worked with SuperPro to create a more affordable and more complete option needed to rebuild the factory front lower control arms. This kit includes all of the parts needed to rebuild your factory lower control arms, with the exception of a ball joint. We recommend either using the Moog Problem solver OR a 555 joint- 555 can be purchased at NAPA, under the name ALTROM.
Kit includes:
SuperPro Double off set bushings for both sides (Lower Inner and outer)
Installation Hardware
SuperPro Machined one- piece Cam bolts for both sides (Lower Inner and Outer)
Silicone based, highly weather resistant assembly grease
Front Control Arm Lower-Inner Rear Offset Kit Alignment Correction. Camber Adjustable Vehicle Application Information:
- 0.6 Degrees of Camber Adjustment
Control arm bushes stabilize the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushing solve this issue as and add the ability to ‘tune’ the wheel alignment to suit the specific requirements of vehicle and driver.
- Axle alignment required after fitting
Front Control Arm Lower-Inner Front Bushing Kit Alignment Correction. Camber and Caster Adjustment Vehicle Application Information:
- +/- 1 Degree Camber & 1 Degree Caster Adjustment available
Made in Australia Lifetime Warranty
SuperPro’s camber bolts overcome the problems associated with the O.E lower inner camber bolts.
The trouble starts when the front lower camber bolts rust into the tubes of the standard camber bolt set up and the tube of the rear bushing.
A one piece front bolt and rear bolt designed to not corrode makes future wheel alignments trouble free.
Fitment:
2003-2009 Lexus GX470
2003-2009 Toyota 4Runner
2007-2009 Toyota FJ Cruiser
