Our Panhard bar correctly re-center’s the axle, correcting is factory position after a lift has been installed; as well as significantly increasing its strength. Ideal for trucks with 2-3.5″ lifts installed / KDSS compatible.
All of our Rear Control Arms are fabricated out of DOM Heavy Wall Tube; That’s THICKER than the Competition!
Panhard Bar- 1.25″ x .3″ DOM Tube
To put this in perspective- Most rock sliders are made out of .120 wall tube, with many brands being made out of Hot Rolled (HREW) tube, which is not as strong as DOM and quite a bit less expensive to use in manufacturing.
Fitted with Apache Poly Bushings
- Grease Captured- Bushings holds grease, no need to periodically regrease the bushing for quite operation.
- Includes silicone grease package- will need to be greased upon initial installation
- Direct Replacement for OEM Panhard bar
Unlike other links on the market using flex joints, Our flex joints are made specifically for OE mounts; meaning they fit the frame mount without the need to use a washer next to the joint, different hardware, etc. They are not an off the shelf retrofitted joint.
1 Rear Extended Fixed Panhard (Track) Bar
Our Control Arms / Panhard’s are fixed to alleviate potential common issues seen in adjustable Control Arms; such as separation caused by a loosening jam nut. Our Control Arms do not require frequent / regular maintenance. Installation is a breeze with no guessing as to where the adjuster needs to be set.
Matte Black Powder Coat
** Installation Notes**
Panhard- This is non directional, but dont forget to grease the bushing with a silicone based poly grease. You need to use the tip of a screw driver to press out (by hand) the center silver bolt sleeve and put the grease behind it- then press it back in by hand. The uppers and lowers do not need to be greased. Silicone grease is long lasting and the panhard does not need to be regularly greased after installation.