Description
- High Quality Polyurethane, maintains height over time
- Perfect fit on top of OE isolator
- Sold as 1 piece
- Lasts longer than rubber
- Easy to add lift height to correct for vehicle lean
—
This is a single rear poly coil spacer to help correct for vehicle lean once a vehicle has been lifted, if a lean exists. It is 15mm (0.6″) thick. This will add the same amount of lift as its thickness to help level up the vehicle. These CANNOT be stacked, only 1 can be used per coil spring. These will suit all rear coil springs that use the factory top rubber coil spring isolator, for these vehicles: 4Runner – 2003 to 2023 (4th and 5th Gen) FJ Cruiser – all years Lexus GX470 and GX460 – all years Prado 120 and 150 – all years
This coil spacer is also ideal for vehicles with KDSS, as offset height rear coils, or a spacer on top of one side if even height coils are used, is recommended. Remember: New Toyota vehicles come with a 1/4″ to 1/2″ lean from the factory, so anything within that range is considered “OK”
